PIR Infrared Motion Sensor-Detector Activated LED Bulb,8w(60-watt A19 Light Bulbs),800lm,Daylight 5000K,Medium Base (E26),Automatic LED Light Bulb

This is a new LED light bulbs , Usually We called it ” motion sensor LED bulbs”, it’s different with the motion-sensing light, It will automatically turn on if the infrared detector detects changes such as someone walks into its area of detection when the ambient light is low or dark. and will last for

This is a new LED light bulbs , Usually We called it ” motion sensor LED bulbs”, it’s different with the motion-sensing light, It will automatically turn on if the infrared detector detects changes such as someone walks into its area of detection when the ambient light is low or dark. and will last for about 30-60 seconds after the infrared detection ceases or the sound stops.

Please Note:

1.Do NOT use with dimmer switch. Detects movement but will only light up when it is dark.
2.Does not need an installer, light automatically turns on and off.

3.This is a direct use LED bulb that can be install on any light fixtures with E26 or E27 sockets. Please make sure the sensor part on the bulb has to be facing towards the direction where possible motion might occur. The sensor can be facing downwards as well. How to use:
The LED light of lamp holder with E27/E26 interface;
The ball bubble lamp base is fixed on a wall or ceiling;

Attentions: 1. Do not install in humid or vibrated locations.
2. Sensitivity will decrease and sense distance will be shortened when temperature goes up.
3. It is not suitable for aiming and electric dimmer switches.
4. It is not suitable for sealed ceiling recessed lights indoors.
5. The lamp will not work when the illumination over 30 Lux.

Some questions about this smart 8w LED bulbs.

1.What is this equivalent to?
This motion sensor 8w LED bulbs will be perfect to replacement for 60 watt standard bulb in the same socket.

2.Do these fit in recessed can light fixtures
Yes, but please don’t use glass or anything to cover the sensor, otherwise the sensor would not work.

Should you have any other problems, please contact me freely.

Product Features

  • In-built passive infrared (PIR) motion sensor and Light Sensor,The Smart Lamp only turns on if movement is detected in dark environment ,Stays on for 40-60 seconds after movement detected.
  • Suitable for home bedroom, household corridor, veranda, home balcony, toilets, underground parking lot, office & shop, etc.
  • Automatic trigger signal output level start LED the drive to work, when people leave induction area, after set up good delay time, shut down automatically, lamps and lanterns in ultra low power dormancy.
  • Brightest LED motion sensor bulb in market that works 24 hours!150¡ã detecting, 4-5 meters detecting range; the angle of the lamp is 150 degrees rotatable
  • Replaces 60w light bulbs, Medium screw base E26 socket, LED Daylight Bulb (500k-6500k),any problems, contact:help@ashialight.com freely.