❆ Product Description:❆
Motion sensor led wall lighting sconce is made of pure aluminum, energy-saving, and environmental protection, function more advanced.
Motion sensor led wall lighting suitable for a deal for Patio, Villa, Balcony, Garden, Open Field, Indoor and Outdoor Dual-use.

❆Product Specificatio：❆
●Light color: warm white
●Color temperature: 3000k
●Material: Aluminum
●Input Voltage: 100-277V AC
●Output Wattage:7W
●Total luminous flux (Lumens): 1200 lm
●Waterproof rating: IP65
●Working hours: 20,000 hours
●Product size: 10*10*10cm / 3.94*3.94*3.94inch
●Packing size: 11.4*11.2*11cm / 4.5*4.4*4.3inch
●Package weight: 0.54kg / 1.18lb
●Beam angle: 0°-130°
●Power Source: Hard-wired Wall Mounted

❆Installation Method：❆
1. Turn on the light and remove the square shroud.
2. Pass the wires of the transformer through the bottom plate and the cover.
3. Install the gasket in the fixture.
4. Install your electrical box, cover it, place the rectangular bottom plate of the lamp on top, level the bottom plate, and drill two mounting holes in the cover.
5. Unscrew the electrical box cover, attach the wires, and screw the bottom plate into the hole drilled in the box cover.

❆Package Contents:❆
●1 x Motion Sensor Wall Light
●1 x User installation instruction

❆Noticed: ❆
If the wall has a electric box, 3.94″size will not cover the electric box, we suggest use a cover to finish the work

Product Features

• 【Smart Motion Sensor】 – Our motion sensor LED wall lighting Auto-on within 10 feet, auto-off after 15-30 seconds of no motion detected .it will turn on only when it is dark and when motion is detected.
• 【 Waterproof IP65】 – Our motion sensor LED wall lighting is the high waterproof standard in lighting.suitable for outdoor wet location, it also can be used indoor.
• 【Beam Angle Adjustable】 – Our motion sensor LED wall lighting built-in bulb can not be replaced，it’s not dimmable, but you can adjust what you want the effect of the light by the aluminum board inside the product, allows you to adjust the angle up & down freely.
• 【Top Quality】- The motion sensor LED wall lighting body is made of double-layer high-end aluminum material，exquisite workmanship, durable, Function More Advanced,7W High Brightness LED will be satisfied with our normal daily lighting requirements, moreover energy-saving and Environmental protection, life up to 20000hours.
• 【Easy to Install】- AC100-277V, Hard-Wired, The light takes only minutes to install, which on wall or surface mounted. use the screw to install and fix it (screws are provided) and no complicated wiring is necessary, it is not difficult to install with the installation manual.